Newly appearing technical articles - September 2015

ABSTRACTS OF LITERATURE


The articles listed below are from recent technical journals and may be of interest to members. Copies are available from Margaret O’Malley at IST Headquarters.

 

Kirk, D. Dr., Coventry Universitiy,  "Principles of Peening Intensity Selection",  The Shot Peener, Summer 2015, Volume 29, Issue 3, pp. 26-34

Abstract
 
In a recently completed research project 48 wires were prepared by varying the carbon content, type of smelting, type of patenting, chemical drawing preparation, single crosssection reduction and drawing speed. This paper gives an overview of:
 
• The changes of characteristic values for the mechanical properties determined by i.e. torsion and tensile tests during storage and depending on heat treatments
• An automated detection of cracks along the wire-length-surface (longitudinal cracks) which is based on the torsion-testing-curve
• The correlation between the variation of wire strength parameters and the variation of geometry of springs and other components

 


comments powered by Disqus